Easy Install Steel Parking Bollards , Driveway Security Posts Withstand External Force

Stainless Steel Bollards Warning Column Pole And Stake Pile For Road

Stainless Steel Bollards Warning Column Pole And Pile Stake For Road Building Introduction

• The warning column is resistant to collision and has good elasticity. It is used for isolation between roads, buildings and parking spaces, so that the driving motor vehicle can serve as a warning.
• Warning column (rubber warning column, flexible warning column, PVC warning column, high-strength warning column, steel warning column)

Stainless Steel Bollards Warning Column Pole And Pile Stake For Road Building Features

• Made of new technology and has good elasticity.
• It can withstand the external force and violently impact the rolling, and quickly return to its original state.
• The wall thickness of the column is 3mm, which is strong and durable.
• With good reflective performance, clearly outline the road.
• The reflector can be a reflective sheet or a reflective film. The reflector is fastened to the cylinder with rivets, and the reflective film is tightly adhered to the cylinder.
• Rain and snow work normally.
• Easy to install and less maintenance.
• It is easy to carry with a lifting ring, and it is easy to connect the isolation belt, the isolation chain and the isolation rod.

Stainless Steel Bollards Warning Column Pole And Pile Stake For Road Building Use

• At the intersection of cities, sidewalks, and the isolation between buildings, the driving motor vehicles play a warning role, and once hit, they will not cause a second injury. During the day, the red, white and red-yellow colors are conspicuous, and the lattice set at night can reflect the dazzling light, reminding the driver.

Stainless Steel Bollards Warning Column Pole And Pile Stake For Road Building Installation Method

• Installation tools: power supply with tens of meters of wire, electric drill (drill 12 or 14), hammer, nut ferrule, tape measure, expansion screw (m10*10 or m10*8).
• Installation method:

1. Use a tape measure to place the position and then square it.
2, connect the power supply, first use the electric drill to align the screw hole to make a mark, then take the warning column to align the mark and punch, the electric drill should be positive, the depth should be about the length of the screw.
3. Align the warning column with a new one, insert the screw into the hammer and insert it with a hammer. Finally, tighten it with a nut sleeve.

Some Of Our Projects